STEP 1: Open Autodesk BIM 360 website and sign in

STEP 2: Select the module selector and click Field Management

STEP 3: Select Checklists in the upper left

STEP 4: Select Templates

STEP 5: Find the checklist you need to add or remove the required signature to and select the three dots to the far right. 

*You can also select the checklist then click the pencil in the upper right to edit the checklist

STEP 6: On the right hand side, you can add or remove required signatures, you can toggle the switch on or off and add additional signatures.

STEP 7: Select Required signatures on the left and fill out who needs to sign the checklist. You can add additional checklists by choosing Add Signature

STEP 8: Once you make your adjustments for each signature required, select Save in the upper right.

Checklists that require signatures:

Quality

• First Work Inspections - _FWI – 
• Inspection Request Record
• Material Verification Inspection - _MV – 
• Mock-Up (Scope(s) being inspected)
• Test Report
• Concrete (SAK) Pre-Pour Field Check
• Concrete Pre-Pour Field Check
• In Wall [General] Field Check

Safety

• Restrooms Checklist
• Safety Contacts and Observations
• Safety Meeting & Training Roster
• Orientation Checklist
• Sub Minimum Performance Standard Checklist
• Weekly Safety Documentation